Wi-Fi Modules

ISM43340-M4G-L44 Serial-to-WiFi & BLE Combo Module

The  ISM43340-M4G-L44  is an embedded 2.4 & 5 GHz Wi-Fi 802.11 a/b/g/n, Bluetooth Low Energy (BLE) and Bluetooth 4.0 module. The module hardware consist of a Broadcom BCM43340 Combo radio, antenna and a STM32F405 host processor with 1MB of flash and supports SPI or UART host interfaces. Read the rest of this entry »

ISM43362-M3G-L44-E/U Serial-to-WiFi Module

The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz  Wi-Fi  module. The Wi-Fi module hardware consists of a Broadcom BCM43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a standard USB, SPI or UART interface capability.

Read the rest of this entry »

ISM43903-R48-L54-E/U Serial-to-WiFi Module

The ISM43903-R48-L54-E/U is an embedded 2.4 GHz  Wi-Fi  module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor, SPI or UART interface capability.

Read the rest of this entry »

Wi-Fi 2.4 Ghz SDIO SIP Module

The ISM43362-L36 is an 802.11 b/g/n Wi-Fi Radio SiP with on board antenna or optional external antenna with a U.FL connector, which is designed for embedded wireless solutions and offers a cost-effective high performance Broadcom radio device (BCM43362) packaged in an 36 pin LGA (24.4mm x 15.3 mm).  The ISM43362-L36 is a FCC/UL/Japan certified module with a SDIO host interface for embedded Linux. Read the rest of this entry »

ISM34x-USB Wi-Fi Dongle

The ISM34x-USB is an embedded wireless Wi-Fi 802.11 b/g/n and Blue Tooth Low energy  (BLE) embedded USB module.  A wireless combo module providing the highest level of integration available for an IoT device.  Bridges BLE sensors to Wi-Fi.   Includes a dual band (2.4 GHz and 5 GHz) IEEE 802.11 a/b/g/n MAC/Baseband/Radio, Bluetooth Low Energy (BLE), Bluetooth 4.0 and NFC. The module implements the  Read the rest of this entry »

Wi-Fi 2.4/ 5GHz, Bluetooth & BLE SiP Module

The ISM43340-L77 quad-radio device provides the highest level of integration for wireless system, with integrated dual band (2.4 GHz/ 5 GHz) IEEE 802.11 a/b/g/n single-stream, MAC/baseband/radio, Bluetooth 4.0.

Read the rest of this entry »

Wi-Fi 2.4 Ghz SDIO SIP Module

The ISM43362-B81 is an 802.11 b/g/n Wi-Fi SiP which is designed for embedded wireless solutions and offers a cost-effective high performance Broadcom radio device (BCM43362) packaged in an  81 pin BGA (8.1mm x 8.6mm).  The ISM43362-L81 has a SDIO host interface for embedded Linux applications Read the rest of this entry »

ISM43340-M4G-EVB-C Wi-Fi & Bluetooth Combo Evaluation Board

The ISM43340-M4G-EVB-E is an embedded wireless evaluation board that is used to evaluate the  802.11 b/g/n eS-Wi-fi and Bluetooth 4.0  embedded module.  The evaluation board consist of a Wi-Fi module with host processor, integrated  antenna and Broadcom Wi-Fi device, supported by WICED. Simply install the USB drivers and you can immediately run the Inventek AT commands to communicate with eS-WiFi or you can install WICED.

Read the rest of this entry »

Wi-Fi 2.4/ 5GHz, Bluetooth, BLE & Near Field Comm SiP Module

The ISM43341-L77 quad-radio device provides the highest level of integration for wireless system, with integrated dual band (2.4 GHz/ 5 GHz) IEEE 802.11 a/b/g/n single-stream, MAC/baseband/radio, Bluetooth 4.0.  It also integrates a low power NFC controller.

Read the rest of this entry »

ISMART Arduino Shields – Wi-Fi & Bluetooth & NFC

The ISMART (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino and ST Micro ST NUCLEO compliant shield suited for all of your wireless application needs.

The ISMART shield is an embedded wireless internet connectivity platform that operates in the 2.4 & 5.0 GHz spectrum.  The ISMART hardware includes the option for  an Inventek eS-WiFi module consisting of the Broadcom BCM43362 (2.4GHz), or BCM43341/0 Dual-Band (2.4GHz / 5GHz) 802.11 a/b/g/n MAC/Baseband/Radio with Integrated Bluetooth 4.0 and NFC.  Read the rest of this entry »

ISM4319-M3G-CY-EVB Cypress USB VCP Evaluation Board

The ISM4319-M3G-CY-EVB is an embedded wireless evaluation board that is used to evaluate the  802.11 b/g/n eS-Wifi embedded module.  Inventek and Cypress Semiconductor worked together to offer a PSoC USB VCP platform that will allow customers to simple add  802.11 b/g/n Wi-Fi to their products.

Read the rest of this entry »

ISM20736S Bluetooth Low Energy SIP

ISM20736S module is an wireless Bluetooth low energy (BLE) connectivity device, based on the Broadcom BCM20736 BLE with integrated M3 Cortex processor SoC chip, with RF antenna, matching and decoupling network, and 512 Kb EEPROM.  The ISM20736S adds wireless charging, simultaneous central and peripheral operation.   The low cost, small foot print (6.5 mm x 6.5 mm x 1.2 LGA 48 pin package  and ease of design-in make it ideal for a range of embedded applications.

Read the rest of this entry »

ISM43362-M3G-EVB-E Wi-Fi Evaluation Board

The ISM43362-M3G-EVB-E is an embedded wireless evaluation board that is used to evaluate the  802.11 b/g/n eS-Wi-fi embedded module.  The evaluation board consist of a Wi-Fi module with host processor, integrated etch antenna and Broadcom Wi-Fi device, supported by WICED. Simply install the USB drivers and you can immediately run the Inventek AT commands to communicate with eS-WiFi or Broadcom WICED SDK.

Read the rest of this entry »

ISM4390-M3H-L44 Embedded Serial-to-WiFi Module

The Inventek ISM4390-M3H-L44 is an embedded wireless Internet Connectivity device. The Wi-Fi module hardware consists of an M3 host processor, with BCM4390 Broadcom Radio, integrated microstrip antenna and an U.FL connector to support antenna diversity. The module supports a UART interface.

Read the rest of this entry »