Embedded Serial-to-WiFi Modules

ISM43340-M4G-L44 Serial-to-WiFi & BLE Combo Module

The ISM43340-M4G-L44 is an embedded 2.4 & 5 GHz Wi-Fi 802.11 a/b/g/n, Bluetooth Low Energy (BLE) and Bluetooth 4.0 module. The module hardware consist of a Broadcom BCM43340 Combo radio, antenna and a STM32F405 host processor with 1MB of flash and supports SPI or UART host interfaces.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a small 14.70mm x 34.22mm surface mount footprint and has full FCC and CE module certification. This product is targeted for low cost embedded wireless applications and enables a quick, easy and cost effective method adding WiFi, Bluetooth, and BLE connectivity to your platforms.

Key module features:

  • 802.11 b/g/n Broadcom BCM43340 Radio device
  • Bluetooth 4.0 with support for Wi-Fi /BLE  co-existence
  • Fully contained TCP/IP stack thus minimizing host CPU requirements
  • Configurable though AT commands
  • Host interface: UART, SPI up to 25+ MHz
  • Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
  • BLE, Bluetooth 4.0
  • Over the Air updates (OTA)
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK 

Product Documentation

Technical Resources

Product Resources

Firmware

Software Scripts Examples

Evaluation Board

Evaluation Board. The EVB supports all eS-WiFi modules in the L44 and L44+10 (Land Grid Array) footprint – ISM43362, ISM4390, ISM43340, ISM43341, ISM4343 and ISM907
ISM43362-M3G-EVB-E311
ISMART (Inventek Systems Module Arduino Test) IoT platform ISMART43340-C Arduino Shield
ISM43340C Shield part

Buy Online from Our Valued Distributors

Buy Inventek products from DigiKey
Buy Inventek products at Avnet
Buy Inventek products from Texim Europe
Buy Inventek products from Macnica Store

Contact Inventek

For sales technical support distribution Volume Pricing and delivery options
Contact Inventek

ISM43362-M3G-L44-E/U Serial-to-WiFi Module

The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz  Wi-Fi  module. The Wi-Fi module hardware consists of a Cypress BCM43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a standard SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC and CE module certification. This product is targeted for low cost embedded wireless applications and enables a quick, easy and cost effective method adding WiFi connectivity to your platforms. A summary of the key module features:

  • 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device.
  • Fully contained TCP/IP stack thus minimizing host CPU requirements
  • Configurable though AT commands.
  • Host interface:  UART, SPI up to 25 MHz
  • Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
  • Low power operation (3.3V supply) with built-in low power modes.
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK 

Product Documentation

Technical Resources

Product Resources

Firmware

Software Scripts Examples

Embedded Talk Video’s

Evaluation Board Options:

Evaluation Board (Part number: ISM43362-M3G-EVB-E) – Standard evb with break out headers for L44 pins
ISM43362-M3G-EVB

Evaluation Board Shield:

ISMART (Inventek Systems Module Arduino Test) IoT platform ISMART43340-C Arduino Shield
ISM43340C Shield part

Buy Online from Our Valued Distributors

Buy Inventek products from DigiKey
Buy Inventek products from Texim Europe
Buy Inventek products from Macnica Store

Contact Inventek

Contact us for Sales Support Volume Pricing & Delivery options
Contact Inventek

ISM43907-WM-L170 Serial-to-WiFi Module

The ISM43907-WM-L170 is an embedded 2.4 & 5.0 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43907 SOC with ARM Cortex-R4 clocked at 320 MHz, 2 MB of SRAM and 640 KB ROM, all clocks, T/R switch and duplexer available for the applications processor, SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product. The module has a very small 11 mm x 11 mm surface mount footprint and has full FCC and CE module certification (In process). This product is targeted for low cost embedded wireless applications and enables a quick, easy and cost effective method adding WiFi connectivity to your platforms.

Summary of the key features for this wifi module

  • ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode).
  • 2 MB of SRAM and 640 KB ROM available for the applications processor.
  • One high-speed 4-wire UART interface with operation up to 4 Mbps.
  •  Two low-speed 2-wire UART interfaces multiplexed on general purpose I/O (GPIO) pins.
  • SPI master/slave interfaces with operation up to 24 MHz
  • Configurable using AT commands (IWIN) or WICED
  • Host interface: UART or SPI
  • 11mm x 11mm x 1.2 mm
  • 17 GPIO’s
  • Input Voltage: 3.3 V
  • Low power operation with built-in low power modes.
  • 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device.
  • Fully contained TCP/IP stack thus minimizing host CPU requirements
  • Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
  • Low power operation (3.3V supply) with built-in low power modes.
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK 

Product Documentation

Technical Resources

Contact Inventek

For sales support Volume Pricing and delivery options
Contact Inventek

Buy Online at Inventek Store

Buy Online

ISM4343-WBM-L151 Wi-Fi / BT Combo Module

The ISM4343-WBM-L151 is an embedded 2.4 GHz Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product.

The module has a very small 10 mm x 10 mm surface mount footprint and will have FCC and CE module certification (In process). This product is targeted for low cost embedded wireless applications and enables a quick, easy and cost effective method adding Wi-Fi connectivity to your platforms. A summary of the key module features:

WLAN, Bluetooth & MCU functions:

  • Single-band 2.4 GHz b/g/n, 802.11b, 802.11g, 802.11n (single stream)
  • STM32 ARM 32-bit CortexTM-M4 with a frequency up to 100 MHz.
  • 1 Mbyte of MCU internal Flash
  • 256KB of SRAM
  • SPI, Quad SPI (support Dual mode), USART, PCM
  • ADC, I2C, I2S, GPIO, Timers
  • JTAG
  • Bluetooth v4.1 with integrated Class 1 PA
  • Bluetooth 2.1+EDR, Buletooth 3.0, Bluetooth 4.1 (Bluetooth Low Energy)
  • Bluetooth v4.2 LE Secure Connection via the Cypress BSA stack.

Product Documentation

Contact Inventek

For sales support Volume Pricing and delivery options
Contact Inventek

ISM4343-M4G-L54 Wi-Fi / BT Combo Module

The ISM4343-M4G-L54 is an embedded 2.4 GHz  Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product.

The ISM4343-M4G-L54 is an embedded Serial WiFi (eS-WiFi), wireless internet connectivity module that operates in the 2.4GHz spectrum.  The eS-WiFi module’s hardware consists of an ARM Cortex M4 host processor, Cypress CYW4343 Single-Band (2.4GHz) 802.11 /b/g/n MAC/Baseband/Radio with Integrated Bluetooth 4.2.

Inventek’s IWIN, AT command set, allows you to quickly establish connectivity for your wireless product, minimizing development time, testing routines and certification. The low cost, small foot print (14.5 mm x 34 mm) and ease of design-in make it ideal for a range of embedded applications.

Uses CYW4343 Cypress Leading Edge Radio Device

  • Includes STM32F412 ST Cortex M4 Microcontroller with 1MB of on board Flash.
  • 2.4 GHz Wi-Fi Band.
  • Bluetooth 4.1 including BLE Support.
  • 2 MB Flash, Xtal, Low Pass filter , 2.4GHz Chip Antenna on the eS-WiFi module
  • Optional U.FL Connector for external 2.4 GHz Antenna
  • Configurable using Inventek proprietary IWIN AT commands.
  • Host interface: UART, SPI
  • 54 Land Grid Array Footprint (7 GPIO for IWIN & 17 GPIO for WICED).

Product Documentation

Contact Inventek

For sales support Volume Pricing and delivery options
Contact Inventek

ISM43903-R48-L54-E/U Serial-to-WiFi Module

The ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor, SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC and CE module certification (In process). This product is targeted for low cost embedded wireless applications and enables a quick, easy and cost effective method adding WiFi connectivity to your platforms.

A summary of the key module features

  • ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode).
  • 1 MB of SRAM and 640 KB ROM available for the applications processor.
  • One high-speed 4-wire UART interface with operation up to 4 Mbps.
  •  Two low-speed 2-wire UART interfaces multiplexed on general purpose I/O (GPIO) pins.
  • SPI master/slave interfaces with operation up to 24 MHz
  • U.FL Connector for external 2.4 GHz Antenna
  • Configurable using AT commands (IWIN)
  • Host interface: UART
  • 44-Pin and L44+10 Land Grid Array Footprint
  • 14.5mm x 30mm x 2.5 mm
  • 17 GPIO’s
  • Input Voltage: 3.3 V
  • Low power operation with built-in low power modes.
  • 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device.
  • Fully contained TCP/IP stack thus minimizing host CPU requirements
  • Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
  • Low power operation (3.3V supply) with built-in low power modes.
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK 

Product Documentation

Technical Resources

Product Resources

Software Scripts Examples

Embedded Talk Video’s

Evaluation Board Detail

ISM43362-M3G-EVB
Evaluation board ISM43362-M3G-EVB-E

Applications

  • PDA, Pocket PC, computing devices
  • Building automation and smart energy control.
  • Industrial sensing and remote equipment monitoring.

Contact Inventek

For sales support Volume Pricing and delivery options
Contact Inventek

Buy Online from Our Valued Distributors

Buy Inventek products from DigiKey
Buy Inventek products at Avnet
Buy Inventek products from Texim Europe
Buy Inventek products from Macnica Store

Buy Online at Inventek Store

Buy Online

ISM34x-USB Wi-Fi Dongle

The ISM34x-USB is an embedded wireless Wi-Fi 802.11 b/g/n and BlueTooth Low energy (BLE) embedded USB module. A wireless combo module providing the highest level of integration available for an IoT device. Bridges BLE sensors to Wi-Fi. Includes a dual band (2.4 GHz and 5 GHz) IEEE 802.11 a/b/g/n MAC / Baseband / Radio, Bluetooth Low Energy (BLE), Bluetooth 4.0 and NFC. 

Quality module implements the Broadcom BCM43340 or the BCM43341, single-chip, combo-radio device an external Flash memory for over the air update. Simply install the USB drivers and you can run the IWIN AT commands (In development) to communicate with eS-WiFi or you can install Broadcom WICED SDK.

A Summary of the features:

  • 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device
  • Fully contained TCP/IP stack thus minimizing host CPU requirements
  • BLE 4.0 support – software for BLE only
  • NFC for ISM341-USB version only
  • Broadcom WICED
  • Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
  • Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK

EVB Product Documentation

ISM43340-M4G-EVB

ISM34x-USB Wi-Fi Dongle

EVB Product Resources

Buy Online from Our Valued Distributors

Inventek Products Distributor List

Contact Inventek

For all your inquiries regarding sales, technical and customer support, distribution volume pricing and delivery options
Contact Inventek