ISM43340-M4G-L44 Serial-to-Wi-Fi Dual Band (2.4 & 5 GHz) & BLE Combo Module

The ISM43340-M4G-L44 is an embedded 2.4 & 5 GHz Wi-Fi 802.11 a/b/g/n, Bluetooth Low Energy (BLE) and Bluetooth 4.0 module. The module hardware consist of a Broadcom BCM43340 Combo radio, antenna and a STM32F405 host processor with 1MB of flash and supports SPI or UART host … Continue reading “ISM43340-M4G-L44 Serial-to-Wi-Fi Dual Band (2.4 & 5 GHz) & BLE Combo Module”

ANTDOM-05-01-WPM GPS Antenna

Active GPS dome antenna with 5 meter cable with SMA connector. The antenna is waterproof, magnetic and is designed to work with a variety of GPS receivers. 1.575 GHz, 50 ohms, 3-5 VDC and a gain of 30 dB at 3.0 … Continue reading “ANTDOM-05-01-WPM GPS Antenna”

ISM43362-M3G-L44-E/U Serial-to-WiFi Module

The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz  Wi-Fi  module. The Wi-Fi module hardware consists of a Cypress BCM43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a standard SPI or UART interface capability. The Wi-Fi … Continue reading “ISM43362-M3G-L44-E/U Serial-to-WiFi Module”

ISM4343-WBM-L151 Wi-Fi / BT Combo Module

The ISM4343-WBM-L151 is an embedded 2.4 GHz Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU. The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple … Continue reading “ISM4343-WBM-L151 Wi-Fi / BT Combo Module”

INVENTEK ANNOUNCES A DUAL ARM CORTEX-R4 WI-FI MODULE

Inventek Systems Introduces the ISM43903 Low Cost Wi-Fi Module with Expanded Memory Capability for IoT applications August 20, 2018- Inventek Systems announces the release of the ISM43903 low cost Wi-Fi module for IoT applications. The ISM43903-R48-L54 is an 802.11 b/g/n, … Continue reading “INVENTEK ANNOUNCES A DUAL ARM CORTEX-R4 WI-FI MODULE”

ISMART 43340-C Arduino Shield – Wi-Fi 2.4 & 5GHz & Bluetooth & BLE

  The ISMART43340-C (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield . The ISMART43340-C shield is assembled with the Inventek eS-WiFi module ISM43340-M4G-L44-C It is a Dual band Wi-Fi 2.4 & 5 GHz  & Bluetooth … Continue reading “ISMART 43340-C Arduino Shield – Wi-Fi 2.4 & 5GHz & Bluetooth & BLE”

ISMART 43362-E Arduino Shields – Wi-Fi 2.4Ghz

The ISMART43362-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield.  The ISMART43362-E shield is assembled with the Inventek eS-WiFi module  ISM43362-M3G-L44-E  . It is a 2.4 GHz Wi-Fi 802.11 b/g/n based on Cypress CYW43362 Radio, St … Continue reading “ISMART 43362-E Arduino Shields – Wi-Fi 2.4Ghz”

ISMART 43903-E Arduino Shields – Wi-Fi 2.4 GHz

The ISMART43903-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield . The ISMART43903-E shield is assembled with the Inventek eS-WiFi ISM43903-R48-L54-E/U module.  The Wi-Fi module hardware consists of a Cypress CYW43903 SOC with ARM … Continue reading “ISMART 43903-E Arduino Shields – Wi-Fi 2.4 GHz”

ISM43903-R48-L54-E/U Serial-to-WiFi Module

The ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional … Continue reading “ISM43903-R48-L54-E/U Serial-to-WiFi Module”

What additional certifications do I need to have for my end product that uses your certified module?

Even though the eS-WiFi module is certified, the end product will still have to go through a small portion of RF certification. Also developers may need to apply for country specific certifications.